keepalived+lvs实现lnmp网站的高可用部署(代码片段)

关键词：

项目需求

  当我们访问某个网站的时候可以在浏览器中输入IP或者域名链接到Web Server进行访问，如果这个Web Server挂了，那么整个系统都无法使用，用户也就不能进行正常的访问，这种情况将对公司产生一定的影响。这就是我们常说的系统中的单点故障。这部分的单点故障可以通过引入负载均衡器和至少另一个Web Server来缓解。同时由于有多台服务器同时提供服务，也加大了系统的负载能力提高了性能。
  因此我们采用LVS的负载均衡技术，将前端请求按照设定规则调度到后端服务器，并与keepalived相结合实现高可用负载均衡。

项目拓扑

项目环境

主机名	主机IP	主机角色
K1	192.168.36.110	Keepalived-Master
K2	192.168.36.111	Keepalived-Backup
WEB1	192.168.36.112	Nginx、PHP
WEB2	192.168.36.113	Nginx、PHP
NFS	192.168.36.114	NFS
Mariadb-M	192.168.36.115	Mariadb-Master
Mariadb-S	192.168.36.116	Mariadb-Slave

开始部署：Keepalived服务器配置

安装Keepalived

[[email protected] ~]#yum install -y keepalived

修改Keepalived配置文件，开启邮件通知功能

[[email protected] ~]#vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs  # 全局配置
   notification_email 
     [email protected]    # keepalived 发生故障切换时邮件发送的对象，可以按行区分写多个
   
   notification_email_from [email protected]  # 设置邮件发送地址
   smtp_server 127.0.0.1    # smtp服务器地址
   smtp_connect_timeout 30  # 指定smtp连接超时时间
   router_id K1.mylinuxops.com  # 运行keepalived服务器标识，发送邮件时显示在邮件标题中的信息
   vrrp_skip_check_adv_addr # 所有报文都检查比较消耗性能，此配置为如果收到的报文和上一个报文是同一个路由器则跳过检查报文中的源地址
   #vrrp_strict # 严格遵守VRRP协议,不允许状况:1,没有VIP地址,2.单播邻居,3.在VRRP版本2中有IPv6地址
   vrrp_iptables    # 严格遵守VRRP防火墙规则
   vrrp_garp_interval 0 # ARP保温发送延迟
   vrrp_gna_interval 0  # 消息发送延迟


vrrp_instance VI_1     # vrrp实例定义
    state MASTER    # 在此虚拟路由器上节点的初始状态：其中所有服务器里只有一个可以是MASTER节点，其余的是BACKUP节点
    interface ens33 # 指定HA检测网络的接口，即网卡名称
    virtual_router_id 27    # 当前虚拟路由器的惟一标识，范围是0-255
    priority 100    # 当前主机在此虚拟路径器中的优先级；范围1-254。主服务器一定要高于备用服务器，且两者之间的数值差越小越好
    advert_int 1    # vrrp通告间隔
    authentication     # 存储的验证类型和密码以进行验证
        auth_type PASS  # 进行验证类型：类型仅可以设置成PASS和AH两种
        auth_pass 1111  # 进行验证的密码：在同一个vrrp_instance中，使用相同的密码才能进行正确的通信
    
    unicast_src_ip 192.168.36.110   # 单播配置
    unicast_peer 
      192.168.36.111    # 目标主机IP
    
    virtual_ipaddress  # 虚拟IP的网络地址，即VIP地址
        192.168.36.100 dev ens33 label ens33:0
        192.168.36.200 dev ens33 label ens33:1
    
    # 定义邮件通知脚本
    notify_master "/etc/keepalived/notify.sh master"    # 当前节点成为主节点时触发的脚本
    notify_backup "/etc/keepalived/notify.sh backup"    # 当前节点转为备节点时触发的脚本
    notify_fault "/etc/keepalived/notify.sh fault"  # 当前节点转为“失败”状态时触发的脚本


# 编写邮件通知脚本
[[email protected] ~]#vim /etc/keepalived/notify.sh
#!/bin/bash
contact=‘[email protected]‘ # 通知的邮箱（首先需要确保能连通外网，否则通知不过去）
notify() 
    mailsubject="$(hostname) to be $1, vip转移"     # 主题
    mailbody="$(date +‘%F %T‘): vrrp transition, $(hostname) changed to be $1"  # 邮件内容
    echo "$mailbody" | mail -s "$mailsubject" $contact  # 邮件发送的内容

case $1 in
master)
    notify master
    ;;
backup)
    notify backup
    ;;
fault)
    notify fault
    ;;
*)
    echo "Usage: $(basename $0) master|backup|fault"
    exit 1
    ;;
esac

# 添加执行权限
[[email protected] ~]#chmod a+x /etc/keepalived/notify.sh

# 邮箱配置
[[email protected] ~]#yum install -y mailx
[[email protected] ~]#vim /etc/mail.rc
set bsdcompat
set [email protected]  # 接收邮件的邮箱
set smtp=smtp.qq.com
set [email protected]    
set smtp-auth-password=kosulaxbbhxrgaci # 邮箱授权码（我的邮箱-->设置-->账户-->开启POP3/SMTP等服务，生成授权码）

[[email protected] ~]#chmod a+x /etc/mail.rc  # 文件添加执行权限

# 重启keepalived服务
[[email protected] ~]#systemctl restart keepalived

# 生成VIP地址（注：Master存活时，VIP在Master上，Slave上不会存在VIP。当Master宕机，VIP将调到Slave上）
[[email protected] ~]#ifconfig
ens33:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.36.100  netmask 255.255.255.255  broadcast 0.0.0.0
        ether 00:0c:29:56:39:e8  txqueuelen 1000  (Ethernet)

ens33:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.36.200  netmask 255.255.255.255  broadcast 0.0.0.0
        ether 00:0c:29:56:39:e8  txqueuelen 1000  (Ethernet)

# 将keepalived配置文件 scp 到BACKUP服务器中
[[email protected] ~]#scp /etc/keepalived/keepalived.conf 192.168.36.104:/etc/keepalived/keepalived.conf
[email protected]‘s password: 
keepalived.conf                                                                 100% 1374     1.4MB/s   00:00  

# BACKUP服务器配置，其余配置与MASTER相同
[[email protected] ~]#vim /etc/keepalived/keepalived.conf
....
    state BACKUP    # 修改为BACKUP节点
    interface ens33
    virtual_router_id 37    # 修改标识为37
    priority 90 # 修改优先级，需要比 MASTER 节点低
    advert_int 1
    authentication 
        auth_type PASS
        auth_pass 1111
    
    unicast_src_ip 192.168.36.111
    unicast_peer 
      192.168.36.110
    
....

# 编写邮件通知脚本
[[email protected] ~]#vim /etc/keepalived/notify.sh
#!/bin/bash
contact=‘[email protected]‘ # 通知的邮箱（首先需要确保能连通外网，否则通知不过去）
notify() 
    mailsubject="$(hostname) to be $1, vip转移"     # 主题
    mailbody="$(date +‘%F %T‘): vrrp transition, $(hostname) changed to be $1"  # 邮件内容
    echo "$mailbody" | mail -s "$mailsubject" $contact  # 邮件发送的内容

case $1 in
master)
    notify master
    ;;
backup)
    notify backup
    ;;
fault)
    notify fault
    ;;
*)
    echo "Usage: $(basename $0) master|backup|fault"
    exit 1
    ;;
esac

# 添加执行权限
[[email protected] ~]#chmod a+x /etc/keepalived/notify.sh

# 邮箱配置
[[email protected] ~]#yum install -y mailx
[[email protected] ~]#vim /etc/mail.rc
set bsdcompat
set [email protected]  # 接收邮件的邮箱
set smtp=smtp.qq.com
set [email protected]    
set smtp-auth-password=kosulaxbbhxrgaci # 邮箱授权码（我的邮箱-->设置-->账户-->开启POP3/SMTP等服务，生成授权码）

[[email protected] ~]#chmod a+x /etc/mail.rc  # 文件添加执行权限

# 重启keepalived服务，并进行宕机测验，查看VIP跳转到K2服务器上
[[email protected] ~]#ifconfig
ens33:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.36.100  netmask 255.255.255.255  broadcast 0.0.0.0
        ether 00:0c:29:56:39:e8  txqueuelen 1000  (Ethernet)

ens33:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.36.200  netmask 255.255.255.255  broadcast 0.0.0.0
        ether 00:0c:29:56:39:e8  txqueuelen 1000  (Ethernet)

VIP跳转邮箱接收邮件

搭建WEB站点（两个WEB站点执行相同操作）

# 编写Nginx编译安装脚本
[[email protected] ~]#vim nginx.sh
#!/bin/bash
yum install -y vim lrzsz tree screen psmisc lsof tcpdump wget ntpdate gcc gcc-c++ glibc glibc-devel pcre pcre-devel openssl openssl-devel systemd-devel net-tools iotop bc zip unzip zlib-devel bash-completion nfs-utils automake libxml2 libxml2-devel libxslt libxslt-devel perl perl-ExtUtils-Embed &>/dev/null
wget https://nginx.org/download/nginx-1.14.2.tar.gz  &>/dev/null
cd nginx-1.14.2/
./configure --prefix=/apps/nginx --user=nginx --group=nginx --with-http_ssl_module --with-http_v2_module --with-http_realip_module --with-http_stub_status_module --with-http_gzip_static_module --with-pcre --with-stream --with-stream_ssl_module --with-stream_realip_module &>/dev/null
make && make install
useradd nginx -s /sbin/nologin -u 2000
chown nginx.nginx -R /apps/nginx/
echo "\n=======================版本==================================\n"
/apps/nginx/sbin/nginx -V

# 给脚本添加执行权限
[[email protected] ~]#chmod a+x nginx.sh  
# 启动安装脚本
[[email protected] ~]#./nginx.sh
# 成功安装Nginx，做nginx命令软链接
[[email protected] ~]#ln -sv /apps/nginx/sbin/nginx /usr/sbin/
‘/usr/sbin/nginx’ -> ‘/apps/nginx/sbin/nginx’

# 启动Nginx
[[email protected] ~]#nginx
# 查看80端口
[[email protected] ~]#ss -ntl
# 修改Nginx配置文件，使其开启php页面访问功能
[[email protected] ~]#vim /apps/nginx/conf/nginx.conf
  2 user  nginx nginx;
  9 pid        logs/nginx.pid;
 39         charset utf-8;
 42         location / 
 43             root   html;
 44             index  index.php index.html index.htm;
 45         
 64         location ~ \.php$ 
 65             root           /apps/nginx/html;
 66             fastcgi_pass   127.0.0.1:9000;
 67             fastcgi_index  index.php;
 68             fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;
 69             include        fastcgi_params;
 70         

# 编写php状态页面
[[email protected] ~]#vim /apps/nginx/html/index.php
<?php
phpinfo();
?>

# Nginx启动前对配置文件进行检查
[[email protected] ~]#nginx -t
# 重新加载Nginx配置文件
[[email protected] ~]#nginx -s reload
nginx: the configuration file /apps/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /apps/nginx/conf/nginx.conf test is successful

# 安装php-fpm模块
[[email protected] ~]#yum install -y php-fpm php-mysql
# 编写php-fpm模块配置文件
[[email protected] ~]#vim /etc/php-fpm.d/www.conf
 12 listen = 127.0.0.1:9000
 33 listen.mode = 0666
 39 user = nginx
 41 group = nginx

# 启动php-fpm
[[email protected] ~]#systemctl restart php-fpm
# 9000端口查看
[[email protected] ~]#ss -ntl
State      Recv-Q Send-Q            Local Address:Port                           Peer Address:Port              
LISTEN     0      128                   127.0.0.1:9000                                      *:* 

两个keepalived服务器中添加 web 的虚拟服务器

[[email protected] ~]#vim /etc/keepalived/keepalived.conf
....
virtual_server 192.168.36.100 80   # 虚拟服务器的虚拟IP地址和服务的端口号
    delay_loop 6    # 系统执行健康检查的时间间隔
    lb_algo wrr # lvs调度的算法：wrr轮询算法
    lb_kind DR  # LVS的DR直接路由机制
    protocol TCP    # 指定转发协议，TCP/UDP

    real_server 192.168.36.112 80  # 实际服务器IP地址和端口号
        weight 1    # 权重值
        TCP_CHECK  # 通过tcpcheck判断RealServer的健康状态
            connect_port 80 # 检测连接端口
            connect_timeout 5   # 连接超时时间
            nb_get_retry 3  # 重连次数
            delay_before_retry 3    # 重连时间间隔
        
    
    real_server 192.168.36.113 80 
        weight 1
        TCP_CHECK 
            connect_port 80
            connect_timeout 5
            nb_get_retry 3
            delay_before_retry 3
        
    


# 重新启动keepalived服务
[[email protected] ~]#systemctl restart keepalived
# 查看生成的ipvsadm规则
[[email protected] ~]#ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  192.168.36.100:80 wrr
  -> 192.168.36.112:80            Route   1      0          0         
  -> 192.168.36.113:80            Route   1      0          0         

两个WEB服务器创建lvs检测脚本（步骤相同）

[[email protected] ~]#vim lvs_dr_rs.sh 
#!/bin/bash
vip=192.168.36.100      
mask=‘255.255.255.255‘
dev=lo:1

case $1 in
start)
    echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
    echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
    echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
    echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
    ifconfig $dev $vip netmask $mask #broadcast $vip up
    #route add -host $vip dev $dev
    echo "The RS Server is Ready!"
    ;;
stop)
    ifconfig $dev down
    echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
    echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
    echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
    echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
    echo "The RS Server is Canceled!"
    ;;
*)
    echo "Usage: $(basename $0) start|stop"
    exit 1
    ;;
esac

# 添加执行权限并运行脚本
[[email protected] ~]#chmod a+x ./lvs_dr_rs.sh 
[[email protected] ~]#./lvs_dr_rs.sh start
The RS Server is Ready!

# 生成检测的虚拟IP
[[email protected] ~]#ifconfig lo:1
lo:1: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 192.168.36.100  netmask 255.255.255.255
        loop  txqueuelen 1000  (Local Loopback)

状态页面查看

VIP状态页

搭建数据库主从复制服务器

Master服务器

# yum安装mariadb服务
[[email protected] ~]#yum install -y mariadb-server
# 启动数据库服务
[[email protected] ~]#systemctl restart mariadb
# 修改mariadb配置文件
[[email protected] ~]#vim /etc/my.cnf
[mysqld]
server_id=1 # ID号
binlog_format=row   # 基于行复制
log-bin=/data/bin/mysql-bin # 生成二进制文件的目录与格式

# 创建二进制文件存放的目录
[[email protected] ~]#mkdir /data/bin
# 授予目录所属关系
[[email protected] ~]#chown mysql.mysql /data/bin/ -R
# 重新启动mariadb服务
[[email protected] ~]#systemctl restart mariadb
# 执行安全脚本
[[email protected] ~]#mysql_secure_installation

# 进入数据库
[[email protected] ~]#mysql -uroot -p123456
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 19
Server version: 5.5.60-MariaDB MariaDB Server

Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.

Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.

MariaDB [(none)]> grant replication slave on *.* to [email protected]‘192.168.36.%‘ identified by ‘centos‘; # 添加slave复制权限
Query OK, 0 rows affected (0.00 sec)

MariaDB [(none)]> flush privileges; # 刷新权限
Query OK, 0 rows affected (0.00 sec)

MariaDB [(none)]> reset master; # 重置master二进制文件大小
Query OK, 0 rows affected (0.00 sec)

MariaDB [(none)]> show master logs; # 查看并记录
+------------------+-----------+
| Log_name         | File_size |
+------------------+-----------+
| mysql-bin.000001 |       245 |
+------------------+-----------+
1 row in set (0.00 sec)

Slave服务器

# yum安装mariadb服务
[[email protected] ~]#yum install -y mariadb-server
# 启动数据库服务
[[email protected] ~]#systemctl restart mariadb
# 修改mariadb配置文件
[[email protected] ~]#vim /etc/my.cnf
[mysqld]
server_id=2 # ID号
read_only   # 只读

# 重新启动mariadb服务
[[email protected] ~]#systemctl restart mariadb
# 执行安全脚本
[[email protected] ~]#mysql_secure_installation

# 进入数据库
[[email protected] ~]#mysql -uroot -p123456 
Welcome to the MariaDB monitor.  Commands end with ; or \g.
Your MariaDB connection id is 15
Server version: 5.5.60-MariaDB MariaDB Server

Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others.

Type ‘help;‘ or ‘\h‘ for help. Type ‘\c‘ to clear the current input statement.

MariaDB [(none)]> CHANGE MASTER TO      # Slave节点添加同步Master数据库的语句
    -> MASTER_HOST=‘192.168.36.115‘,
    -> MASTER_USER=‘repluser‘,
    -> MASTER_PASSWORD=‘centos‘,
    -> MASTER_PORT=3306,
    -> MASTER_LOG_FILE=‘mysql-bin.000001‘,
    -> MASTER_LOG_POS=245;
Query OK, 0 rows affected (0.01 sec)

MariaDB [(none)]> slave start;  # 启用从节点
Query OK, 0 rows affected (0.00 sec)

MariaDB [(none)]> show slave status\G;  # 状态查看
*************************** 1. row ***************************
               Slave_IO_State: Waiting for master to send event
                  Master_Host: 192.168.36.115
                  Master_User: repluser
                  Master_Port: 3306
                Connect_Retry: 60
              Master_Log_File: mysql-bin.000001
          Read_Master_Log_Pos: 245
               Relay_Log_File: mariadb-relay-bin.000002
                Relay_Log_Pos: 529
        Relay_Master_Log_File: mysql-bin.000001
             Slave_IO_Running: Yes      # IO、SQL线程已经启动，数据同步
            Slave_SQL_Running: Yes

Master、Slave数据同步测试

MariaDB [(none)]> create database darius;   # Master节点创建一个darius数据库
Query OK, 1 row affected (0.00 sec)

MariaDB [(none)]> show databases;
+--------------------+
| Database           |
+--------------------+
| information_schema |
| darius             |
| mysql              |
| performance_schema |
+--------------------+
4 rows in set (0.00 sec)

MariaDB [(none)]> show databases;   # Slave查看，如同步成功，则主从复制创建完成。
+--------------------+
| Database           |
+--------------------+
| information_schema |
| darius             |
| mysql              |
| performance_schema |
+--------------------+
4 rows in set (0.00 sec)

两个keepalived服务器添加mariad虚拟服务器

[[email protected] ~]#vim /etc/keepalived/keepalived.conf
....
virtual_server 192.168.36.200 3306 
    delay_loop 6
    lb_algo wrr
    lb_kind DR
    protocol TCP

    real_server 192.168.36.115 3306 
        weight 1
        TCP_CHECK 
            connect_port 3306
            connect_timeout 5
            nb_get_retry 3
            delay_before_retry 3
        
    
    real_server 192.168.36.116 3306 
        weight 1
        TCP_CHECK 
            connect_port 3306
            connect_timeout 5
            nb_get_retry 3
            delay_before_retry 3
        
    

....

# 生成ipvsadm规则
[[email protected] ~]#ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  192.168.36.100:80 wrr
  -> 192.168.36.112:80            Route   1      0          0         
  -> 192.168.36.113:80            Route   1      0          0         
TCP  192.168.36.200:3306 wrr
  -> 192.168.36.115:3306          Route   1      0          0         
  -> 192.168.36.116:3306          Route   1      0          0    

两个mariadb服务器创建lvs检测脚本（步骤相同）

[[email protected] ~]#vim lvs_dr_rs.sh
#!/bin/bash
vip=192.168.36.200
mask=‘255.255.255.255‘
dev=lo:1

case $1 in
start)
    echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
    echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
    echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
    echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
    ifconfig $dev $vip netmask $mask #broadcast $vip up
    #route add -host $vip dev $dev                                                                                 
    echo "The RS Server is Ready!"
    ;;
stop)
    ifconfig $dev down
    echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
    echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
    echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
    echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
    echo "The RS Server is Canceled!"
    ;;
*)
    echo "Usage: $(basename $0) start|stop"
    exit 1
    ;;
esac

# 给脚本添加执行权限
[[email protected] ~]#chmod a+x lvs_dr_rs.sh
# 运行脚本
[[email protected] ~]#./lvs_dr_rs.sh start
The RS Server is Ready!

# 生成检测的虚拟IP
[[email protected] ~]#ifconfig lo:1
lo:1: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 192.168.36.200  netmask 255.255.255.255
        loop  txqueuelen 1000  (Local Loopback)

搭建NFS服务器

# 修改NFS配置文件，设置将要共享的目录
[[email protected] ~]#vim /etc/exports
/data *(rw,no_root_squash)

# 重新启动NFS服务，并设置开机启动
[[email protected] ~]#systemctl restart nfs
[[email protected] ~]#systemctl enable nfs

# 查看NFS共享目录
[[email protected] ~]#exportfs -v
/data           <world>(sync,wdelay,hide,no_subtree_check,sec=sys,rw,secure,no_root_squash,no_all_squash)

# 解压wordpress包
[[email protected] ~]#unzip wordpress-5.0-zh_CN.zip
# 将wordpress包内文件移动到共享目录中，进行共享
[[email protected] ~]#mv wordpress/* /data/
[[email protected] ~]#cd /data/
# 生成wordpress配置文件
[[email protected] data]#mv wp-config-sample.php wp-config.php
# 修改wordpress配置文件
[[email protected] data]#vim wp-config.php
...
/** WordPress数据库的名称 */
define(‘DB_NAME‘, ‘wordpress‘);

/** MySQL数据库用户名 */
define(‘DB_USER‘, ‘wpuser‘);

/** MySQL数据库密码 */
define(‘DB_PASSWORD‘, ‘centos‘);

/** MySQL主机 */
define(‘DB_HOST‘, ‘192.168.36.200‘);

/** 创建数据表时默认的文字编码 */
define(‘DB_CHARSET‘, ‘utf8‘);
...

将NFS共享的文件挂载到两个WEB服务器中

# 写入fstab文件中，开机自动挂载
[[email protected] ~]#vim /etc/fstab 
192.168.36.114:/data /apps/nginx/html nfs _netdev,defaults 0 0

# 查看挂载情况
[[email protected] ~]#df -h
Filesystem            Size  Used Avail Use% Mounted on
192.168.36.114:/data   95G  3.9G   92G   5% /apps/nginx/html

访问测试

多次宕机实验依旧能访问，起到web服务的高可用功能。

lvs/nat+keepalived负载均衡实现

一、keepalived简介keepalived是分布式部署解决系统高可用的软件，结合lvs(LinuxVirtualServer)使用，解决单机宕机的问题。keepalived是一个基于VRRP协议来实现IPVS的高可用的解决方案。对于LVS负载均衡来说，如果前端的调度器direct发生故... 查看详情

lvs/nat双主+keepalived负载均衡实现

一、keepalived简介keepalived是分布式部署解决系统高可用的软件，结合lvs(LinuxVirtualServer)使用，解决单机宕机的问题。keepalived是一个基于VRRP协议来实现IPVS的高可用的解决方案。对于LVS负载均衡来说，如果前端的调度器direct发生故... 查看详情

lvs/dr+keepalived负载均衡高可用实现

一、keepalived简介keepalived是分布式部署解决系统高可用的软件，结合lvs(LinuxVirtualServer)使用，解决单机宕机的问题。keepalived是一个基于VRRP协议来实现IPVS的高可用的解决方案。对于LVS负载均衡来说，如果前端的调度器direct发生故... 查看详情

keepalived实现服务高可用认识

Keepalived实现服务高可用认识一、首先说明Keepalived服务二、Keepalived高可用工作原理三、keepalived软件实践使用1、安装2、解析配置文件扩展：一、首先说明Keepalived服务何为keepalived？keepalived软件除了可以管理LVS软件外，还能解决一... 查看详情

keepalived实现服务高可用(代码片段)

keepalived实现服务高可用  第1章keepalived服务说明1.1keepalived是什么？　　Keepalived软件起初是专为LVS负载均衡软件设计的，用来管理并监控LVS集群系统中各个服务节点的状态，后来又加入了可以实现高可用的VRRP功能。因此，... 查看详情

keepalived+lvs

一keepalived简介：keepalived软件起初是专为LVS负载均衡软件设计的，用来管理并监控LVS集群中各个服务节点的状态，后来又加入了可以实现高可用的VRRP功能，因此。keepalived除了能够管理LVS软件之外，还可以作为其他服务的高可用... 查看详情

lvs+keepalived实现高可用(代码片段)

...求转发给故障的rs服务器，这样就会导致请求的无效性。keepalive软件可以进行健康检查，而且能同时实现LVS的高可用性，解决LVS单点故障的问题，其实keepalive就是为LVS而生的。LVS-DR+Keepalived一、实验环境：Keepalived1+lvs1(Director1)：19... 查看详情

24keepalived高可用介绍

24.1、什么是keepalived：Keepalived软件起初是专为LVS负载均衡软件设计的，用来管理并监控LVS集群系统中各个服务节点的状态，后来又加入了可以实现高可用的VRRP功能。因此，Keepalived除了能够管理LVS软件外，还可以作为其他服务(例... 查看详情

作业十一

...、调试过程。5、搭建一套LVS-DR模型的高性能集群，并用Keepalived实现nginx与lvs的高可用 查看详情

keepalived+lvs

第1章keepalived服务说明1.1keepalived是什么？　　Keepalived软件起初是专为LVS负载均衡软件设计的，用来管理并监控LVS集群系统中各个服务节点的状态，后来又加入了可以实现高可用的VRRP功能。因此，Keepalived除了能够管理LVS软件外，... 查看详情

lvs+keepalived高可用负载均衡模式分析(代码片段)

1.前言在《keepalived双机热备》这篇文章中，我写了利用keepalived这个开源软件实现高可用的功能，以及keepalived高可用所使用的协议——利用vrrp协议，在高可用网络组内广播自己的优先级，优先级最高的就能抢占vip资源，充当MASTER... 查看详情

keepalived简介

一、Keepalived简介(1)Keepalived是一种高可用解决方案的软件，通过VRRP(虚拟路由器冗余协议)实现高可用功能(2) Keepalived能够用于配置管理LVS软件，同时对LVS集群节点做健康检查，也能够作为其他服务（如Nginx、MySQL）的高可用解... 查看详情

keepalived-基于keepalived实现lvs的高可用(代码片段)

...f08;虚拟路由器1），备/主（虚拟路由器2）keepalived基于vrrp协议完成地址流动为vip地址所在的节点生成ipvs规则(在配置文件中预先定义)为ipvs集群的各RS做健康状态检测基于脚本调用接口完成脚本中定义的功能，... 查看详情

keepalived管理lvs负载均衡实战(代码片段)

...节点的健康检查功能。为了解决LVS的这些使用不便问题，Keepalived便诞生。Keepalived服务的三大重要功能管理VLS负载均衡实现对LVS集群node健康检查作为系统网络服务的高可用**闲话不多说，直接上实例**LB端Keepalived配置[[email prot... 查看详情

lvs+keepalived群集实验(代码片段)

目录一，keepalived介绍1，keepalived是什么 2、Keepalived工作原理3、Keepalived体系主要模块及其作用二，keepalived服务主要功能1，管理LVS负载均衡软件2，支持故障自动切换 3、实现LVS集群中节点的健康检查4、实现LVS... 查看详情

keepalived实现高可用(代码片段)

一.keepalived是什么keepalived最初是为LVS负载均衡设计的，用于监控LVS集群系统中的各个节点的服务状态。后来又加入了基于VRRP的高可用功能，所以也可以作为nginx,mysql等服务的高可用解决方案使用。VRRP(VirtualRouterRedundancyProtocol)即... 查看详情

第十一周作业

...、调试过程。5、搭建一套LVS-DR模型的高性能集群，并用Keepalived实现nginx与lvs的高可用 查看详情

keepalived+lvs/dr(代码片段)

keepalived是解决单故障节点的软件1、keepalived+LVS/DR2、任意单故障节点的高可用作分发器的高可用用keepalived作LVS/DR模式分发器的高可用实验拓扑clientnode1主、node2备webA、webB浮动资源有:浮动ip、策略IP规划client192.168.4.254node1192.168.4.50n... 查看详情